Liquidsoap 1.1.1 : Encoding formats

Presentation

Encoders are used to define formats into which raw sources should be encoded by an output. Syntax for encoder is: %encoder(parameters...) or, if you use default parameters, %encoder.

Formats determine the stream content

In most liquidsoap scripts, the encoding format determines what kind of data is streamed.

The type of an encoding format depends on its parameter. For example, %mp3 has type format(audio=2,video=0,midi=0) but %mp3(mono) has type format(audio=1,video=0,midi=0).

The type of an output like output.icecast or output.file is something like (...,format('a),...,source('a))->source('a). This means that your source will have to have the same type as your format.

For example if you write output.file(%mp3,"/tmp/foo.mp3",playlist("~/audio")) then the playlist source will have to stream stereo audio. Thus it will reject mono and video files.

Liquidsoap provides operators that can be used to convert sources into a format acceptable for a given encoder. For instance, the mean operator transforms any audio source into a mono source and the audio_to_stereo operator transforms any audio source into a stereo source.

Format variables (or lack of, rather..)

You can store an atomic format in a variable, it is a value like another: fmt = %mp3. However, an atomic format is an atomic constant despite its appearance. You cannot use a variable for one of its parameters: for example 

x = 44100
%vorbis(samplerate=x)

is not allowed, you must write %vorbis(samplerate=44100).

If you really need to use variables in encoder, for instance if bitrate is given by a user's configuration, you may alleviate that by generating a pre-defined list of possible encoders and include it on top of your script using the %include directive.

List of formats and their syntax

All parameters are optional, and the parenthesis are not needed when no parameter is passed. In the following default values are shown. As a special case, the keywords mono and stereo can be used to indicate the number of channels (whether is is passed as an integer or a boolean).

MP3

Mp3 encoder comes in 3 flavors:

Parameters common to each flavor are:

Parameters for %mp3 are:

Parameters for %mp3.vbr are:

Parameters for %mp3.abr are:

Examples:

Optionally, liquidsoap can insert a message within mp3 data. You can set its value using the msg parameter. Setting it to "" disables this feature. This is its default value.

WAV

%wav(stereo=true, channels=2, samplesize=16, header=true, duration=10.)

If header is false, the encoder outputs raw PCM. duration is optional and is used to set the WAV length header.

Because Liquidsoap encodes a possibly infinite stream, there is no way to know in advance the duration of encoded data. Since WAV header has to be written first, by default its length is set to the maximun possible value. If you know the expected duration of the encoded data and you actually care about the WAV length header then you should use this parameter.

Ogg

The following formats can be put together in an Ogg container. The syntax for doing so is %ogg(x,y,z) but it is also possible to just write %vorbis(...), for example, instead of %ogg(%vorbis(...)).

All ogg encoders have a bytes_per_page parameter, which can be used to try to limit ogg logical pages size. For instance: 

# Try to limit vorbis pages size to 1024 bytes
%vorbis(bytes_per_page=1024, ...)
Vorbis
# Variable bitrate
%vorbis(samplerate=44100, channels=2, quality=0.3)
% Average bitrate
%vorbis.abr(samplerate=44100, channels=2, bitrate=128, max_bitrate=192, min_bitrate=64)
# Constant bitrate
%vorbis.cbr(samplerate=44100, channels=2, bitrate=128)

Quality ranges from -0.2 to 1, but quality -0.2 is only available with the aotuv implementation of libvorbis.

Opus

Opus is a lossy audio compression made especially suitable for interactive real-time applications over the Internet. Liquidsoap supports Opus data encapsulated into Ogg streams.

The encoder is named %opus and its parameters are as follows. Please refer to the Opus documentation for information about their meanings and values.

Theora
%theora(quality=40,width=w,height=h,
        picture_width=w,picture_height=h,
        picture_x=0, picture_y=0,
        aspect_numerator=1, aspect_denominator=1,
        keyframe_frequency=64, vp3_compatible=false,
        soft_target=false, buffer_delay=0.1,
        speed=0)

You can also pass bitrate=x explicitly instead of a quality. The default dimensions are liquidsoap's default, from the settings frame.video.height/width.

Dirac
%dirac(quality=35,width=w,height=h,
       picture_x=0, picture_y=0,
       aspect_numerator=1, aspect_denominator=1)
Speex
%speex(stereo=false, samplerate=44100, quality=7,
       mode=[wideband|narrowband|ultra-wideband],
       frames_per_packet=1,
       complexity=none)

You can also control quality using abr=x or vbr=y.

Flac

The flac encoding format comes in two flavors:

The parameters are: 

%flac(samplerate=44100, 
      channels=2, 
      compression=5, 
      bits_per_sample=16)

compression ranges from 0 to 8 and bits_per_sample should be one of: 8, 16 or 32.

AAC

The syntax for the internal AAC encoder is: 

%aac(channels=2, samplerate=44100, bitrate=64, adts=true)

AAC+

The syntax for the internal AAC+ encoder is: 

%aacplus(channels=2, samplerate=44100, bitrate=64)

FDK-AAC

This encoder can do both AAC and AAC+. It is projected to replace both encoders in a future release.

Its syntax is: 

%fdkaac(channels=2, samplerate=44100, aot="mpeg2_he_aac_v2", transmux="adts", transmux=true, sbr_mode=false)

Where aot is one of: "mpeg4_aac_lc", "mpeg4_he_aac", "mpeg4_he_aac_v2", "mpeg4_aac_ld", "mpeg4_aac_eld", "mpeg2_aac_lc", "mpeg2_he_aac" or "mpeg2_he_aac_v2"

And transmux is one of: "raw", "adif", "adts", "latm", "latm_out_of_band" or "loas".

You can consult fdk-aac's github repository for more details on configuration values and meanings.

Gstreamer

The %gstreamer encoder can be used to encode streams using the gstreamer multimedia framework. This encoder extends liquidsoap with all available GStreamer formats which includes most, if not all, formats available to your operating system.

The encoder's parameters are as follows: 

%gstreamer(channels=2,
           audio="lamemp3enc",
           has_video=true,
           video="x264enc",
           muxer="mpegtsmux",
           metadata="metadata",
           log=5,
           pipeline="")

Please refer to the Gstreamer encoder page for a detailed explanation of this encoder.

External encoders

For a detailed presentation of external encoders, see this page. 

%external(channels=2,samplerate=44100,header=true,
          restart_on_crash=false,
          restart_on_metadata,
          restart_after_delay=<int>,
          process="")

Only one of restart_on_metadata and restart_after_delay should be passed. The delay is specified in seconds. The encoding process is mandatory, and can also be passed directly as a string, without process=.