Encoding formats

Encoders are used to define formats into which raw sources should be encoded by an output. Syntax for encoder is: %encoder(parameters...) or, if you use default parameters, %encoder.

Please note that not all encoding formats are available at all time. Most of them require optional dependencies. If a format is not available, you should see an error like this:

Error 12: Unsupported encoder: %sine().
You must be missing an optional dependency.

In particular, due to limitations with static linking on windows, only the %ffmpeg encoder is available with our windows build. However, this encoder provides a lot of codecs and formats, and it is quite likely that it can provide what you need.

Formats determine the stream content

In most liquidsoap scripts, the encoding format determines what kind of data is streamed.

The type of an encoding format depends on its parameter. For example, %mp3 has type format(audio=pcm(stereo)).

The type of an output like output.icecast or output.file is something like (...,format('a),...,source('a))->source('a). This means that your source will have to have the same type as your format.

For example if you write

output.file(%mp3,"/tmp/foo.mp3",playlist("~/audio"))

then the playlist source will have to stream stereo audio.

In the case of audio format, liquidsoap tries its best to convert the format whenever possible. For instance, in the above, liquidsoap will convert mono files from the playlist to stereo files by duplicating the single audio channel in a mono file. Likewise, if the encoder requires mono audio, it will compute the mean of a stereo files.

List of formats and their syntax

All parameters are optional, and the parenthesis are not needed when no parameter is passed. In the following default values are shown. As a special case, the keywords mono and stereo can be used to indicate the number of channels (whether is is passed as an integer or a boolean).

MP3

Mp3 encoder comes in 3 flavors:

  • %mp3 or %mp3.cbr: Constant bitrate encoding
  • %mp3.vbr: Variable bitrate, quality-based encoding.
  • %mp3.abr: Average bitrate based encoding.

Parameters common to each flavor are:

  • stereo=true/false, mono=true/false: Encode stereo or mono data (default: stereo).
  • stereo_mode: One of: "stereo", "joint_stereo" or "default" (default: "default"). Default means that the underlying library (libmp3lame) will pick the stereo mode based on compression ration and input channels.
  • samplerate=44100: Encoded data samplerate (default: 44100)
  • internal_quality=2: Lame algorithms internal quality. A value between 0 and 9, 0 being highest quality and 9 the worst (default: 2).
  • id3v2=true: Add an id3v2 tag to encoded data (default: false). This option is only valid if liquidsoap has been compiled with taglib support.

Parameters for %mp3 are:

  • bitrate: Encoded data fixed bitrate

Parameters for %mp3.vbr are:

  • quality: Quality of encoded data; ranges from 0 (highest quality) to 9 (worst quality).

Parameters for %mp3.abr are:

  • bitrate: Average bitrate
  • min_bitrate: Minimum bitrate
  • max_bitrate: Maximum bitrate
  • hard_min: Enforce minimal bitrate

Examples:

  • Constant 128 kbps bitrate encoding: %mp3(bitrate=128)
  • Variable bitrate with quality 6 and samplerate of 22050 Hz: %mp3.vbr(quality=7,samplerate=22050)
  • Average bitrate with mean of 128 kbps, maximum bitrate 192 kbps and id3v2 tags: %mp3.abr(bitrate=128,max_bitrate=192,id3v2=true)

Optionally, liquidsoap can insert a message within mp3 data. You can set its value using the msg parameter. Setting it to "" disables this feature. This is its default value.

Shine

Shine is the fixed-point mp3 encoder. It is useful on architectures without a FPU, such as ARM. It is named %shine or %mp3.fxp and its parameters are:

%shine(channels=2,samplerate=44100,bitrate=128)

WAV

%wav(stereo=true, channels=2, samplesize=16, header=true, duration=10.)

If header is false, the encoder outputs raw PCM. duration is optional and is used to set the WAV length header.

Because Liquidsoap encodes a possibly infinite stream, there is no way to know in advance the duration of encoded data. Since WAV header has to be written first, by default its length is set to the maximum possible value. If you know the expected duration of the encoded data and you actually care about the WAV length header then you should use this parameter.

FFmpeg

See detailed ffmpeg encoders article.

Ogg

The following formats can be put together in an Ogg container. The syntax for doing so is %ogg(x,y,z) but it is also possible to just write %vorbis(...), for example, instead of %ogg(%vorbis(...)).

All ogg encoders have a bytes_per_page parameter, which can be used to try to limit ogg logical pages size. For instance:

# Try to limit vorbis pages size to 1024 bytes
%vorbis(bytes_per_page=1024)

Vorbis

# Variable bitrate
%vorbis(samplerate=44100, channels=2, quality=0.3)
% Average bitrate
%vorbis.abr(samplerate=44100, channels=2, bitrate=128, max_bitrate=192, min_bitrate=64)
# Constant bitrate
%vorbis.cbr(samplerate=44100, channels=2, bitrate=128)

Quality ranges from -0.2 to 1, but quality -0.2 is only available with the aotuv implementation of libvorbis.

Opus

Opus is a lossy audio compression made especially suitable for interactive real-time applications over the Internet. Liquidsoap supports Opus data encapsulated into Ogg streams.

The encoder is named %opus and its parameters are as follows. Please refer to the Opus documentation for information about their meanings and values.

  • vbr: one of "none", "constrained" or "unconstrained"
  • application: One of "audio", "voip" or "restricted_lowdelay"
  • complexity: Integer value between 0 and 10.
  • max_bandwidth: One of "narrow_band", "medium_band", "wide_band", "super_wide_band" or "full_band"
  • samplerate: input samplerate. Must be one of: 8000, 12000, 16000, 24000 or 48000
  • frame_size: encoding frame size, in milliseconds. Must be one of: 2.5, 5., 10., 20., 40. or 60..
  • bitrate: encoding bitrate, in kbps. Must be a value between 5 and 512. You can also set it to "auto".
  • channels: currently, only 1 or 2 channels are allowed.
  • mono, stereo: equivalent to channels=1 and channels=2.
  • signal: one of "voice" or "music"

Theora

%theora(quality=40,width=640,height=480,
        picture_width=255,picture_height=255,
        picture_x=0, picture_y=0,
        aspect_numerator=1, aspect_denominator=1,
        keyframe_frequency=64, vp3_compatible=false,
        soft_target=false, buffer_delay=5,
        speed=0)

You can also pass bitrate=x explicitly instead of a quality. The default dimensions are liquidsoap’s default, from the settings frame.video.height/width.

Speex

%speex(stereo=false, samplerate=44100, quality=7,
       mode=wideband, # One of: wideband|narrowband|ultra-wideband
       frames_per_packet=1,
       complexity=5)

You can also control quality using abr=x or vbr=y.

Flac

The flac encoding format comes in two flavors:

  • %flac is the native flac format, useful for file output but not for streaming purpose
  • %ogg(%flac,...) is the ogg/flac format, which can be used to broadcast data with icecast

The parameters are:

%flac(samplerate=44100,
      channels=2,
      compression=5,
      bits_per_sample=16)

compression ranges from 0 to 8 and bits_per_sample should be one of: 8, 16, 24 or 32. Please note that 32 bits per sample is currently not supported by the underlying libflac.

FDK-AAC

This encoder can do both AAC and AAC+.

Its syntax is:

%fdkaac(channels=2, samplerate=44100, bandwidth="auto", bitrate=64, afterburner=false, aot="mpeg2_he_aac_v2", transmux="adts", sbr_mode=false)

Where aot is one of: "mpeg4_aac_lc", "mpeg4_he_aac", "mpeg4_he_aac_v2", "mpeg4_aac_ld", "mpeg4_aac_eld", "mpeg2_aac_lc", "mpeg2_he_aac" or "mpeg2_he_aac_v2"

bandwidth is one of: "auto", any supported integer value.

transmux is one of: "raw", "adif", "adts", "latm", "latm_out_of_band" or "loas".

Bitrate can be either constant by passing: bitrate=64 or variable: vbr=<1-5>

You can consult the Hydrogenaudio knowledge base for more details on configuration values and meanings.

Gstreamer

The %gstreamer encoder can be used to encode streams using the gstreamer multimedia framework. This encoder extends liquidsoap with all available GStreamer formats which includes most, if not all, formats available to your operating system.

The encoder’s parameters are as follows:

%gstreamer(channels=2,
           audio="lamemp3enc",
           has_video=true,
           video="x264enc",
           muxer="mpegtsmux",
           metadata="metadata",
           log=5,
           pipeline="")

Please refer to the Gstreamer encoder page for a detailed explanation of this encoder.

External encoders

For a detailed presentation of external encoders, see this page.

%external(channels=2,samplerate=44100,header=true,
          restart_on_crash=false,
          restart_on_metadata,
          restart_after_delay=30,
          process="progname")

Only one of restart_on_metadata and restart_after_delay should be passed. The delay is specified in seconds. The encoding process is mandatory, and can also be passed directly as a string, without process=.